verified Cargo Three-Wheeler · 10 Inch Bias Ply

4.50-10 Cargo Tyre Sizes in Vapi GIDC
New & Tested Used In Stock

An 8PR heavy-cargo casing for three-wheelers running full loads through the GIDC industrial belt, where sidewall heat and shoulder wear end up costing a fleet more than the tyre itself.

phone_in_talkCall +91-9377158216 chatGet Instant Quote
tune

4.50-10 Technical Specifications

Official dimensions, rim diameter, load and speed ratings

Specification Parameter Standard Rating / Metric
Section Width 4.50 inch (114 mm)
Aspect Ratio Bias-ply casing
Rim Diameter 10 inch (254 mm)
Overall Diameter 483 mm
Construction Nylon bias-ply, tube type, 8PR
Load Rating 8PR - 85 kg per tyre at 55 PSI
Tread Depth (New) 9.0 mm
Cold Pressure 35 PSI solo / 45 PSI laden
Best Suited For Piaggio Ape Xtra LDX, Ape City, Atul Auto Shakti, Mahindra Alfa Load
electric_rickshaw

Compatible Vehicles for 4.50-10

Popular models and fleet variants running this size

electric_rickshaw Piaggio Ape Xtra LDX
electric_rickshaw Piaggio Ape City
electric_rickshaw Atul Auto Shakti
electric_rickshaw Mahindra Alfa Load
verified

Available Brand Patterns

Authorized OEM tread patterns in stock with warranty

MRF Lug 4.50-10 8PR

Recommended

Deep lug geometry that bites in soft mud and survives the sharp-edged debris found on broken GIDC service roads.

CEAT Buland 4.50-10 8PR

Recommended

Load-rated casing with a cut and chip resistant compound, sized for continuous payload work in Vapi's factory belt.

info

Fitment Advice & Size Verification

4.50-10 8PR is the heavier-duty fitment used on cargo three-wheelers such as the Piaggio Ape Xtra LDX, Ape City, Atul Auto Shakti and Mahindra Alfa Load. A cargo vehicle running this size must keep 45 PSI at the rear once it is loaded, and 35 PSI when empty, because the same casing is expected to work on wet, broken, oil-contaminated factory approach roads. Measure the pressure cold and re-torque the wheel nuts after the first 100 km with a new tyre fitted.

Note: Always verify your vehicle door jamb sticker, fuel lid placard, or existing tyre sidewall markings before purchasing. For safe handling and speedometer accuracy, overall rolling diameter should remain within ±2% of original manufacturer fitment.
quiz

Frequently Asked Questions

Expert answers for 4.50-10 pricing, pressure, and warranty

The 4.50-10 is a larger tyre on a bigger rim, which raises the overall diameter to about 483 mm against 406 mm on the 4.00-8. That gives a larger contact patch and a higher load rating, so the 4.50-10 suits cargo three-wheelers while the 4.00-8 suits passenger CNG autos. The sizes are not interchangeable without changing the rims.
45 PSI cold when the vehicle is fully loaded and 35 PSI when it is running empty. Running a loaded cargo three-wheeler soft is the single biggest cause of premature casing failure, because the sidewall flexes on every joint and the heat builds up in the shoulder.
Yes. We stock 4.50-10 8PR casings and supply regular commercial buyers in Vapi GIDC, Sarigam and Umbergaon with bulk pricing, GST invoices and scheduled pressure audits. Call +91-9377158216 to talk about fleet rates.

Explore More Rickshaw & Auto Tyres Sizes

4.00-8 3.75-12

Check 4.50-10 Stock Today

Visit Sahara Tyre at Phase 1 GIDC Char Rasta, opposite the CNG pump, or contact our workshop technicians directly.

phone_in_talkCall +91-9377158216 chatWhatsApp Inquiry