verified Passenger Car Radial · 14 Inch

165/65 R14 Tyres in Vapi GIDC
New & Tested Used In Stock

A mid-width 14-inch radial that suits the compact sedans and tallies on the Vapi GIDC fleet, stocked in everything from value commuters to premium touring patterns.

tune

165/65 R14 Technical Specifications

Official dimensions, rim diameter, load and speed ratings

Specification Parameter Standard Rating / Metric
Section Width 165 mm
Aspect Ratio 65%
Rim Diameter 14 inch (356 mm)
Overall Diameter 570 mm
Construction Radial, tubeless
Load Index / Speed Rating 85T (440 kg) / 180 km/h
Tread Depth (New) 8.0 mm
Cold Pressure 32 PSI front / 32 PSI rear
Best Suited For Mahindra Verito, Ford Figo (older variants), compact sedans
directions_car

Compatible Vehicles for 165/65 R14

Popular models and fleet variants running this size

directions_car Mahindra Verito
directions_car Ford Figo (older variants)
directions_car Compact sedans and hatchbacks on 14-inch rims
directions_car Taxi and fleet cars in Vapi GIDC
verified

Available Brand Patterns

Authorized OEM tread patterns in stock with warranty

MRF ZLX 165/65 R14

Recommended

Quiet comfort radial with a long tread life, a favourite on high-mileage Vapi fleet cars.

Apollo Alnac 4G 165/65 R14

Recommended

Asymmetric tread with a stiff outer shoulder for cornering stability and a 5-year warranty.

CEAT SecuraDrive 165/65 R14

Recommended

Wide longitudinal grooves for monsoon aquaplaning resistance with unconditional road hazard cover on eligible patterns.

info

Fitment Advice & Size Verification

165/65 R14 suits the Mahindra Verito, older Ford Figo variants and a wide range of compact sedans and fleet cars that run 14-inch rims. The 165 mm section gives a noticeably better contact patch than 155/65 R14 while staying inside the same rolling-diameter envelope, which is why it remains a safe, popular choice. Confirm the code on your sidewall, and if you are moving up from a smaller width, budget for a 3D wheel alignment because the wider tyre changes the scrub radius.

Note: Always verify your vehicle door jamb sticker, fuel lid placard, or existing tyre sidewall markings before purchasing. For safe handling and speedometer accuracy, overall rolling diameter should remain within ±2% of original manufacturer fitment.
quiz

Frequently Asked Questions

Expert answers for 165/65 R14 pricing, pressure, and warranty

Yes, that is a common and legal upgrade. A 175/70 R14 measures about 601 mm in overall diameter against 570 mm for a 165/65 R14, an increase of roughly 5.4% - which is above the two percent tolerance, so it is not a like-for-like change. Stay at or below 2% and the speedometer and ABS stay accurate. We will measure the old and new tyres before fitting.
32 PSI front and rear is the normal city setting for this size, rising by 2 to 3 PSI on a full load or during monsoon running. Always check the door placard, because the correct figure depends on the vehicle, not just the tyre size.
Yes. Steel rims are balanced with clip-on steel weights and alloy rims with lead-free adhesive zinc weights, so the diamond cut face of an alloy wheel is never scratched. Every wheel is re-spun after the weights are applied to confirm the reading.

Explore More Car & SUV Tyres Sizes

Check 165/65 R14 Stock Today

Visit Sahara Tyre at Phase 1 GIDC Char Rasta, opposite the CNG pump, or contact our workshop technicians directly.